Subminimal NanoFoamer V2 Milk Frother
NanoFoamer V2 Upgrades:
Click-On NanoScreens - Our new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
Replaceable Impeller - Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
- Upgraded Impeller Material - The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
- Improved Waterproofing - Overall better seals on the closures and shaft.
- Better Motor - The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
- Stainless Steel Housing - The motor housing is now made of real brushed stainless steel for a far more premium experience.
- More Stable Shaft - Tighter tolerances deep inside the motor translate directly onto the shaft's stability. Spinning dead center is key to spinning fast and reducing vibrations.
- On/Off Digital Switch - The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
- Safety PCB - Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
- New Battery Housing - The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
- Reduced Vibrations - The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
- All New Engineering - Better internal engineering with sonic welded components instead of snap-fitted parts.
NanoFoamer V2 - The only AA battery-operated handheld milk foamer capable of making premium cafe-quality microfoam milk for latte art at home. Perfect foam for your cappuccino, cafe latte, or flat white, and includes a free Latte Art MasterClass with the purchase.
Ever notice that cheap milk “froathers” only ever seem to add a whole lot of dry, stiff foam with big bubbles that doesn’t mix in with your coffee? The difference is in the technique used to generate the foam. Microfoam is frothed milk with bubbles so small that they cannot be seen by the naked eye and give it that shimmering, liquid velvety finish that blends in with the coffee crema and can be used to make latte art. The NanoFoamer enables you to create microfoam with pre-heated milk in a milk jug.
The NanoFoamer has three different screen sizes for different microfoam types: ordinary, fine and superfine. The NanoFoamer churns your pre-heated milk (65°C or close to it is ideal) for about 15 seconds. Starting in the middle to incorporate the air into the milk, move to the side to create the microfoam. Then pour your beautiful velvety microfoam over espresso and enjoy your cafe-esque latte or cappuccino as you intend it wherever you are.
Your Foam Your Choice - Changing the NanoScreens and adjusting how long you churn the milk adjusts the amount and density of micro-foam you make.
Keep It Handy - Store your NanoFoamer on the adhesive wall-mount or put the protective hood on and keep it in a drawer nearby.
Cleans Easy - We made the NanoFoamer waterproof so you can clean it without worry. Just give it a spin under running water after each use.
Heavy Duty Shaft - The 5mm diameter (0.2") stainless steel shaft ensures the NanoFoamer has a controlled and sturdy rotation and will operate wobble-free for years to come.
NanoScreens - Two different nano-screens are included with the NanoFoamer. These create slightly different textured milk. Note that the NanoFoamer can also be used without a screen to create normal foam or for mixing drinks.
- High-speed Impeller - High speed and high torque electric motor deliver the performance required for creating silky smooth micro-foam.
Waterproof - The housing and switch have been designed to be waterproof for complete peace of mind when washing the Nanofoamer.
- Protective Hood - The protective hood keeps the shaft, impeller, and nano-screen protected inside your kitchen drawer or during transport.
Wall mount - Keep your NanoFoamer within reach with the self-adhesive wall mount stand. Apply the stand to a wall near your coffee machine or even on the side of the machine.
Compliance - NanoFoamer is made from FDA & CE compliant food-grade materials.
- Material - Stainless Steel, Food grade ABS Plastic
- Impeller Material - Polycarbonate (Replaceable)
- Speed - Single Speed (3k RPM Submerged)
- Battery - 2 x AA batteries(sold separately)
- Rechargeable - No
- Weight - 104g
- Dimensions - 234 x 35 x 35mm
- 1 x Subminimal NanoFoamer Milk Frother
- 2 x Nano-screens
- 1 x Wall Mount
- 1 x Protective Hood
- 1 x User Manual
- 1 x Certificate of Authenticity
- 1 x Access code for Latte Art Master Class